•  
    FAST LINE 240
    Ref. : FL 240
    PVC Melher tech.valmex: Price (VAT included) : 1999 euros
    Hypalon Orca Pennel & Flipo: Price (VAT included) : 2699 euros

    Foldable transom

    The Fast Line has been specially created to facilitate the storage of your tender with its engine. A simple manipulation allows you fold the transom in order that the  engine do not exceed from the dimensions of the boat. Your tender can then be easely stored in a trunk or on the deck of your boat.

    The hull is build in aluminium with a flat deck to ensure light weight and solidity. The V-shape of the hull also allows good speed and confort in all weather conditions.

    STANDARD EQUIPMENT:

    • Foldable transom
    • Fabric PVC Valmex®, Mehler Technologie glued or welded seams
    • Inflation valves
    • Aluminium hull, anti corrasion tre    ated 
    • Marine paint on aluminium powder 
    • U-bolts of lifting and towing integrated to the hull
    • Marine anti-skid surface, UV resistant 
    • Ultra wide band chafing
    • Protection bow
    • Aluminum bench
    • Bag under bench
    • Pump, Paddles, Repair kit

     

     

     

    ENVIRONMENT:

    We pay great attention to the respect of the environment during the production of 3D Tender boats. We make sure to use non-polluting process , energy economic respecting the health of employees and users. The choice of raw materials is crucial since it allows to build very strong but also close to nature boats.

     

    FEATHERWEIGHT 3D TENDER:


    The aluminum hull boats bring their strength while giving them an unbeatable advantage in terms of weight. These boats can be powered by small engines, cheaper, more fuel efficient, reducing their COemissions.

     

    ALUMINIUM 3D TENDER:

    Aluminum is one of the only materials that can be recycled so without losing its unlimited qualities and properties .

    Powder coating 3D Tender chose to use powder paint. These powders are electrically charged and are sprayed onto the prepared surfaces before placing in the oven. The finish is impeccable, the painted surfaces are smooth and shiny.

    The powder paints bring considerable advan- tages compared to paintings conventional liquid: 

    • No volatile organic mixture
    • No solvent (no disk of the sun , pollution, etc ...)
    • No pollution, excess powder is easily collected by suction

    Time and curing temperature were significantly improved in order to reduce energy consumption of the process.

     

    TESTS CONDUCTED ON PAINTING:

    • Adhesion of primer (BS EN 12206-1)
    • Thickness of coatings (ISO 2178)
    • Grip paint / support (ISO 2409 and ISO 4624) 
    • Accelerated UV (ISO 11507)
    • Accelerated salt spray (ISO 9227)
    • Resistance to impact (ISO 6272)

     

    TESTS CONDUCTED ON TISSUES AND ASSEMBLIES:

    • Mechanical properties (ISO 1421, ISO 4674 and ISO 2411 )
    • Assemblies Resistance to heat (ISO 6185) 
    • Sealed floats (ISO 6185)
    • Accelerated UV (ISO 4892) 
    Lenght (cm) 240
    Width (cm) 136
    Tube diameter 36
    Number of passengers 3
    Max.load 320 KG
    Total weight 34
    Number of airtight chambers 3
    Shaft Short
    Recommended min.power 2.5 HP
    Authorized max power  8 HP
    3D_Tender_fast_line_240.jpg
    Fast_line_3D_Tender_vue_dessus.jpg
    Fast_line_3D_tender_tableau_plie.jpg
    Fast_line_3D_tender_tableau_deplie.jpg

    3D_Tender_fast_line_240.jpg

    Fast_line_3D_Tender_vue_dessus.jpg

    Fast_line_3D_tender_tableau_plie.jpg

    Fast_line_3D_tender_tableau_deplie.jpg

Legal informations
Powered by diasite